How to effectively maintain the Wet And Dry Vacuum to ensure its performance?

To ensure the long-lasting and efficient performance of the Wet And Dry Vacuum, here are some effective maintenance suggestions:
Clean the body regularly:
Use a damp cloth to wipe the body shell, avoid using water or chemical cleaners to prevent damage to the electrical insulation.
During the cleaning process, be careful not to damage any electronic components or plugs.
Clean the air filter:
The air filter is an important part of the dehumidifier dryer and should be cleaned regularly to ensure its normal operation.
Use clean water or mild detergent to clean the air filter, and the water temperature should be controlled below 40 degrees.
After cleaning, make sure the air filter is completely dry before putting it back into the machine.
Check the power cord and plug:
Check the power cord and plug regularly for damage or aging, and replace them in time if there is any problem.
Avoid applying excessive tension on the power cord or plug to prevent damage.
Check and clean the dust bin:
After each use, clean the dust and debris in the dust bin to ensure that the dust bin is unobstructed.
Check the tightness of the dust bin regularly and replace it in time if it is damaged.
Check and replace the filter regularly:
The filter plays a key role in filtering and recovering dust and fine particles. It should be checked and replaced regularly according to the frequency of use.
Use the recommended filter model and brand to ensure the performance and efficiency of the device.
Storage precautions:
When not in use, the Wet And Dry Vacuum should be stored in a dry, ventilated place, away from direct sunlight and humid environment.
When storing, make sure the device is turned off and unplugged.